Xilbitcat Manual

NAME

xilbitcat - concatenate files created by XACT MakeBits

SYNOPSIS

xilbitcat «output file» «input files»*

DESCRIPTION

xilbitcat is used to put together a configuration bit stream file which includes configurations for more than one Xilinx device. This is necessary when more than one Xilinx is configured serially.

xilbitcat will output a file suitable for the xilscript program, XACT tools most probably will not do any further operations on it.

When creating configurations for BOAR, the first input file contains the configuration for the master xilinx, the second for the first dataflow xilinx etc.

EXAMPLES

RAM: > xilbitcat.b68k d.bit mx_biq_iir.bit biq_iir.bit biq_iir.bit biq_iir.bit
Name of the design: mx_biq_iir.lca
Type of chip (?): 4010PG191
Date of creation: 95/03/21
Time of creation: 01:50:20
Configuration data: 22267 bytes, 178134 bits, 2 extra one-bits
Name of the design: biq_iir.lca
Type of chip (?): 4010PG191
Date of creation: 95/03/21
Time of creation: 02:02:43
Configuration data: 22267 bytes, 178134 bits, 2 extra one-bits
Name of the design: biq_iir.lca
Type of chip (?): 4010PG191
Date of creation: 95/03/21
Time of creation: 02:02:43
Configuration data: 22267 bytes, 178134 bits, 2 extra one-bits
Name of the design: biq_iir.lca
Type of chip (?): 4010PG191
Date of creation: 95/03/21
Time of creation: 02:02:43
Configuration data: 22267 bytes, 178134 bits, 2 extra one-bits
Writing to "d.bit"
RAM: >